The special cold cut circular saw blades of Contor cold cut flying saws vary in size. According to the range of the diameter of the welded pipe that needs to be sawed, the range of the wall thickness, the material of the welded pipe determines which type of material is used for the cold-cut flying saw blade.

Generally speaking, the diameter of the round pipe is less than 4mm, the thickness of the saw blade is within 4mm, the diameter of the saw blade is 315-450mm; the diameter of the round pipe is more than 76mm, the diameter of the saw blade is 450-650mm; using the Contor cold-cut flying saw, In the case of conventional operation, it is possible to achieve the purpose of saving production cost by realizing that the saw blade "ends of its normal lifetime" will not collapse in the middle. This is one of the reasons why the Contor cold cut flying saw is popular. 

If your welded pipe factory now has a Contor cold-cut flying saw, please refer to the instruction manual and the purchase contract, which will specify the detailed specifications of the saw blade. During the installation and commissioning process, the customer service engineer will also inform the worker the saw blade teeth information. If there is still an unknown situation, please email us flyingsaw@scontor.net. If you have plans to purchase the Contor cold-cut flying saw, you are also welcome to contact us via wechat/whatsapp:008615904057530 All staff of Contor will serve you wholeheartedly!