FAQ-Contor

FAQ

: tube mill machine process flow

If you want to know how to use tube mill machine, you must master its process flow. The specific process flow of the tube mill machine is as follows:
Details >

: How to change the saw blade

This article is introduce how to replace the saw blade with the steel tube cold saw cutting machine.
Details >

: The saw cart can not return after the tracing

There is something wrong with saw cart drive motor or the saw cart electric machine.Circuit problem.Cart speed is faster than pipe speed, and the showing length is smaller above 6mm than setting length.
Details >

: The system can not enter the mode of auto.

The saw cart isn’t at the position of the HOME key light shinning.The line J141 didn’t connect with the motion controller.The line J160 didn’t connect with the motion controller. There are problems or no feedback for cart motor driving, feeding motordrivingor cutting motor driving.
Details >

: Research on the Precision of Friction Saw Influencing Workpiece Quality

The paper presents the effect of precision of friction saw on workpiece quality,which is obtained by analysing the movement of friction saw.
Details >

: 300 square CNC milling type flying cutoff contor cold saw

The 300 square CNC cutting machine is another success after the company Shenyang Contor Machine and Eletric Equipment Co.,LTD successfully adjusted the size 406 cutting machine of Surya in India, Which shows that our company is qualified for cutting wellinbig diameter and wall thickness pipe. In the joint efforts of all people, we have made great achievements in making big size pipe cutting machine.
Details >