The double-saw cold-cut flying saw saves the saw blade and reduces the cost of the saw blade: through the R-0 control mode, the cold saw blade is cut through the pipe profile. The cost of two small saw blades is much lower than the price of a large saw blade. The double-saw cold-cut flying saw uses a high-strength, high-rigidity pointed blade to cut the pipe with internal ribs, and welds high-strength materials for a wide range of materials. The cutting life of the saw blade is more than twice that of a normal saw blade. Conte recommends that when the pipe diameter is greater than 100 and the wall thickness is more than 6mm, a double saw blade cold cut flying saw can be considered. Although the one-time investment in the pre-purchased equipment is relatively high, it will save you raw material costs and consumables costs in the subsequent daily production. The Kangte double saw blade cold cut flying saw has stable performance and high efficiency: the software is our own research and development design team, familiar with the production requirements of the pipeline industry, with more than 20 years of rich experience. Based on the requirements of pipe diameter / wall thickness / line speed, based on the servo system and our own software, we can provide the best steel pipe and pipe cutting solutions for customers around the world.