Hot-cut saw The so-called hot-cut saw is a traditional computer flying saw, which is very familiar to everyone. It is also called ordinary saw. The "hot" is relative to the "cold" of the cold-cut saw. Because of the friction cutting, the saw blade has a high rotational speed. The cutting temperature is high, so there is a large noise and spark during cutting, the tube has burrs and the risk factor is high. Of course, the eager cut also has its value. For example, the tube with low requirements on the nozzle is still hot cut. saw.

The cold-cut saw is cut by milling. When cutting, the saw blade has low rotation speed and low temperature. The biggest advantage of cold cutting is that the cut nozzle is smooth and burr-free, and there is no sparking and splashing during cutting, and the noise is small, safe and environmentally friendly. At present, after continuous improvement and upgrading, the production efficiency of cold-cut saws has surpassed that of traditional hot-cut saws. Many companies are gradually changing the hot cut to cold-cut saws in order to improve the competitiveness of enterprises.

The profiling and milling sawing saw is also a kind of milling method, but it is more suitable for the large-diameter, thick-walled pipe in-line cutting, the cutting effect is as smooth as the cold cutting without burr, but compared to the cold cutting Saw, profile milling, using a double saw blade to cut along the outer contour of the pipe, the equipment is stable, reliable, and can save the cost of the saw blade.

In addition to the above common equipment, well-informed, who knows which online cutting machine? Welcome to leave a message.