The cold-cut saw independently developed by Shenyang Contor is gradually replacing the friction saw in the welded pipe industry. The cutting method of the cold-cut saw is different from the traditional friction saw. It is a milling method, and the temperature of the saw blade is cut during the cutting.

Slow, low temperature, tube cutting effect, smooth and burr-free. Cold cut saws should be noted in the process of use After replacing the specifications, confirm whether the maximum speed meets the production speed and adjust the parameters appropriately.The automatic state prohibits the length from being cleared.When modifying the set length, first reduce the speed of the production line.After the modification is completed, slowly accelerate.Avoid cutting the open tube.The front and rear rollers of the clamp cannot be adjusted too much.Do not stop when sawing.Calibrate the tube length once a day.When the Shenyang Contor cold-cut saw is used properly and maintained in a timely manner, it can maintain a very good stability and the failure rate is very low. Please contact us for details.contor@scontor.net