According to the national low-voltage electrical and weak electricity installation, construction specifications, and our 20 years of practical experience in Shenyang contor, there are generally several requirements for the wiring of the flying cutoff saw electrical system:

First, the cable needs to be laid in the galvanized steel pipe, and the pipe diameter requires 40% of the allowance for heat dissipation. Also, the steel pipe should be connected to the ground wire to prevent electromagnetic interference.Second, the power line and signal line can not be worn in the same steel pipe, AC and DC can not be worn in a steel pipe. It is recommended to use shielded twisted pair cable for better anti-interference effect.

Third, consider from the perspective of safety and anti-interference. The flying cutoff saw saw should be grounded independently and the grounding resistance should not exceed 4 ohms.Shenyang contor has been engaged in the flying cutoff saw industry for more than 20 years. It has professional R&D, production, sales and after-sales service teams. The flying cutoff saw products with independent intellectual property rights are stable and efficient, and can be customized according to the actual needs of customers. Please contact us for details.Email:contor@scontor.net