Compared with traditional hot-cut saws, Shenyang Contor cold flying saw are more precise and stable.Mainly because it uses Contor's main control system and the linear guide screw feed on the machine to move so the maintenance of cold cut saw is very important in the process of use, mainly including the following:

1. Check the oil quantity of the linear guide oil every day and replenish it in time.2. feed the upper and lower bearings, add calcium base grease every month3. the spindle gearbox bearing monthly calcium-based grease4. the rack adds calcium-based fat every ten days5. Replace the gear oil of the main shaft gearbox every year.

Also clean the bed every day. It is also important to keep the iron filings on the rails clean.Cold saws independently developed by Shenyang Contor, if maintained in a timely manner and used correctly, will greatly reduce the failure rate of the equipment and provide production efficiency.