The best cold saw manufacture in China!

Cold-cut flying saw performance: During the metal sawing process, the heat generated by sawing the saw blade is transferred to the sawdust through the saw teeth, and the saw blade and the workpiece remain cool. Cold cutting saws are different from traditional friction saws. The friction between the workpiece and the friction saw blade results in a high temperature of the friction saw and the workpiece. The cold-cut flying saw has high cross-section precision, no burr inside and outside, smooth cut surface, no need for subsequent processing such as flat chamfering, reducing the processing strength of subsequent processes, saving time and raw materials. The high temperature caused by friction does not change the performance and improve cutting efficiency. No sparks, no noise, environmental protection and energy saving.

Cold cut flying saw advantage: the combination of traditional internal and external operations, the operation interface is simple and clear, after simple training, the field staff can operate the system. A large amount of data storage and long-term debugging parameters can be saved on the touch screen and can be saved in multiple groups. Effectively prevent field workers from inadvertently modifying parameters or erroneously deleting parameters, resulting in loss of parameters.The pipe selection screen is intelligently calculated, and only the on-site staff selects the type of pipeline to be produced according to the actual situation, which greatly saves on-site management time. The system trend graph is more realistic, the communication rate is improved, and it is more realistic and delicately reflects the operation of the system, which provides a powerful basis for the efficient operation of the system. There are three modes available.

 When entering the manual mode and entering the analog or automatic mode, if the conditions are not met, an error message will pop up, which is convenient for the field staff to quickly eliminate the fault and save debugging time. Area alarms can calculate the cutting ability of a single saw blade. When the zone alarm setpoint is exceeded, it will flash, prompting the user to replace the saw blade to ensure uniformity and consistency of the workpiece to be cut.Advantages: low safety noise, good production environment, low spindle speed, high safety factor; good cutting flatness, no burr, no need for flat head or CNC cutting, high cutting efficiency and low loss. Friendly interface, clearer, simpler control, richer information, and simple setup for excellent cutting results.